| Camshaft setting/locking plates are used to accurately align a datum slot, located in the end of the camshaft, with the top face of the camshaft housing to hold the camshaft at the (TDC) Top Dead Centre position.
Locking pins are designed to pass through datum holes in the timing belt pulleys into fixed position timing holes on the engine. The Crankshaft TDC Location Pin is designed to screw into the cylinder block and provide a stop for the crankshaft to be positioned against to set the TDC position. Crankshaft Locking Tools are used to set the crankshaft timing position during both removal and replacement of the timing belt.
Flywheel Locking Tool is required on engines where the flywheel and crankshaft must be held at the correct timing position. This tool is used in conjunction with the appropriate TDC Setting Screw.
- Full list of components with OEM reference provided.
- Guidance notes on components.
- Metal case also available Part No 4536.
- Some components are used on later Ford engines.
- Made in Sheffield.
| Code | OEM Toolcode | Description |
| C034 |
999 7151
303-367
21-162B
49JE01 054
21-162 |
Locking Strap |
| C035 |
303-507
999-7152
21-210 |
Timing Pin |
| C036 |
303-574
21-163
303-620
999 7201 |
Crankshaft Timing Pin |
| C050 |
23-019 |
6mm Setting Pin + Washer |
| C053 |
21-123
KM 6011
5711-TB |
9.5mm Setting Pin |
| C055 |
23-020 |
12.7mm Setting Pin |
| C056 |
21-168
999-7119
999-7120
303-393
0188F
303-1272 |
Flywheel Locking Tool |
| C059 |
Shims |
Shims (2) |
| C060 |
21-104 |
TDC Setting Screw |
| C061 |
999-5193
U20003
2064
15-046
23-047
5193 |
Setting Spigot |
| C070 |
5190
2065A
MP 1-300
U40021
MP1-300
21-105
999-5190 |
Camshaft Locking Bracket |
| C095 |
310-084
23-058
T10008 |
Tensioner Locking Tool |
| C157 |
T10050
23-059
310-085 |
Crankshaft Setting Tool |
| C216 |
MP 1-301
T20102
MP1-301
U40074
3359 |
Injection Pump Locking Pin |
| C253 |
23-029 |
Setting Pin 8.25mm |
| C313 |
999-7120
303-393-01 |
Flywheel Locking tool adaptor (01) |
|
