| Crankshaft Locking Pin | Camshaft Clamp Assembly (Twin Cam) | Camshaft Timing Tool Petrol & Diesel | Primary Timing Chain Pre-Load Tool | VANOS Unit Engagement Wrench | Bushes | Tensioner Locking Pins.
This comprehensive set of tools enables the correct timing positions to be achieved on both camshaft and crankshaft whilst replacing the timing chain on both petrol and diesel engines.
The kit includes a special wrench for controlled turning of the exhaust camshaft sprocket when removing and installing the VANOS unit.
Also included is a Primary Timing Chain Pre-Load Tool for tensioning the timing chain on M50 M52 M42 and M60 engines.
- A comprehensive timing tool set that includes the tools required to set both the camshafts and crankshafts as well as remove the Vanos unit
- Specifically designed for M42, M43, M50, M52 and M60 petrol engines
- Also used on M51 diesel engine
- Chain driven engines
- Kit in metal tray also available Part NO 4544
| Code | OEM Toolcode | Description |
| C020 |
LRT-12-171
LRT-12-108
12-108
11 5 120
LRT12-108
11 2 300
KM 813
12-171
LRT12-171 |
Crankshaft Alignment Pin |
| C021 |
11 3 240 |
Twin Cam Alignment Tool |
| C022 |
11 3 190 |
Camshaft Alignment Tool - Petrol |
| C023 |
LRT-12-112
KM 811
11 3 320
12-112
LRT12-112 |
Camshaft Alignment Tool - Diesel |
| C024 |
11 4 220
10171 |
Chain Pre-Tensioner Tool (Nut and Spindle) |
| C025 |
11 5 490 |
Vanos Unit Sprocket Tool |
| C026 |
LRT12-114
LRT-12-114
11 3 292
12-114
2mm Drill Bit
KM 823 |
Tensioner Locking Pins (2) |
| C385 |
11 3 390 |
Timing Chain Pre-Tension Tool (Nut and Spindle) |
|
